At a mere 130 g per pedal, the Look Kéo 2 MAX pedals are one of the lightest ,b>cycling pedals in its category. This has been achieved through the use of a carbon injection process allowing for weight reduction and improved durability.

Particular attention was focused on reliability and provided through features such as: a carbon injected pedal body, a stainless steel cleat contact area, an oversized axle with dual seals, making this a pedal built to last.

The new line of Look Kéo 2 MAX pedals maintains a low cleat contact height even with the use of a steel oversize axle. The pedal is built with two miniature ball bearings (12 mm inner x 18 mm outer diameters) and a needle roller bearing.

LOOK axles are only approved once they have survived a million cycles at 100 revolutions per minute with a 90kg (198lbs) load at the centre of the pedal and an eccentric rotation (replicating a bump each revolution). This test largely surpasses current standards (reference NF EN 14781). Dual seals increase bearing longevity.

Thanks to 14 mm of threads on the new LOOK axle, the Q-factor may be extended by 2 mm with the use of specific washers available separately. Use of these specific washers results in a Q-factor of 55 mm versus the original 53 mm.

For a more efficient and more comfortable pedal stroke, the Kéo 2 MAX has a cleat contact surface area 12% larger than the Kéo Carbon. To further improve the transfer of power and to longevity of the pedal, this surface area is made of stainless steel moulded directly into the pedal body.

RRP £109.99